Skip to navigation Skip to content

Modus Advanced Blog

Providing relevant information on cutting-edge manufacturing materials and processes to help our partners move from idea to ignition.

What Happens During a SigShield™ DFM: a Design for Manufacturability Review and Consultation Service?

Ever wanted to know what goes into the Design for Manufacturability (DFM) process for SigShield™ parts?

Form-in-Place Gasket Services: What to Look for in a Manufacturing Partner

Die Cut Gaskets eGuide: 5 Frequent Design Oversights & How to Address Them

If you make a mistake during the design phase, you run the risk of going over budget and not receiving your solution in time. Our latest eGuide will help you avoid these common design oversights. Get a free copy by subscribing to our blog.

Quality Certifications for Manufacturing: AS9100 vs. ISO 9001

What is a Form-in-Place Gasket?

Modus Advanced Welcomes Jesse Satkoski as Procurement Specialist

Modus Advanced Promotes Tanner Stephan to Procurement Manager

6 Biggest Takeaways from Our Form-in-Place Gasket Design Guide

If we didn’t have other work to do, the team at Modus Advanced could probably write 100,000 words on form-in-place (FIP) gasket design. When we sat down to write the FIP gasket guide, we had to settle for a little over 6,500 words. To us, it’s a start, although we understand that may seem lengthy to many readers.

Modus Advanced Adds Shaun Thiesen as Regional Sales Manager

Modus Advanced Promotes Mike Carson to Senior Field Applications Engineer

Parker Chomerics Form-in-Place Gasket Materials

Submit a design