Skip to navigation Skip to content

Modus Advanced Blog

Providing relevant information on cutting-edge manufacturing materials and processes to help our partners move from idea to ignition.

How is Rubber Bonded to Metal?

From time to time, while working as an Applications Engineer at LORD Corporation, I would get a call from a customer who was concerned the bond would fail on the vibration isolator mounts they were considering using. After all, a vibration mount is a rubber-to-metal bonded product in which an adhesive bonding process is used to manufacture it. I could easily see how this would be a concern, especially if someone doesn’t often deal with metal adhesive or is not familiar with the rubber-to-metal ...

3 Reasons to Choose Die Cut Gaskets

Die Cut Gaskets eGuide: 5 Frequent Design Oversights & How to Address Them

If you make a mistake during the design phase, you run the risk of going over budget and not receiving your solution in time. Our latest eGuide will help you avoid these common design oversights. Get a free copy by subscribing to our blog.

The Top 4 EMI Shielding Gasket Manufacturing Processes

4 Keys to Successful Form-in-Place Gasket Design

Why Consider a "Safetied" Vibration Isolation Mount Solution?

How Waterjet Technology Helped Build a Hyperloop Pod

Planning to Prevent Manufacturing Disruption

There’s always potential disruptions in the manufacturing process – materials may not be readily available; customer requirements may have been overlooked when a project was quoted; perhaps changes were made to the design after receiving a quote that didn’t flow through to the purchase order. These hindrances are frustrating and may possibly delay product shipment, but shouldn’t completely derail gasket production.  

What is EMI Shielding and Why is it Important for Your Design?

What Could Happen when Vibration Isolation Isn’t Considered in the Design Stage

Don't Miss Out.... On-Site Thermal Interface Materials Lunch-and-Learn